R&S SMA100B - Page 641

Remote control commands
R&S
®
SMA100B
641User Manual 1178.3834.02 ─ 09
Parameters:
<Extension> TXT | CSV
*RST: TXT
Example: See Example "User correction data exchange" on page 636 .
Manual operation: See "ASCII File Settings" on page 109
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect <Filename>
Selects the ASCII file to be imported or exported.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "User correction data exchange" on page 636 .
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 110
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn <Column>
Selects the separator between the frequency and level column of the ASCII table.
Parameters:
<Column> TABulator | SEMicolon | COMMa | SPACe
*RST: COMMa
Example: See Example "User correction data exchange" on page 636 .
Manual operation: See "ASCII File Settings" on page 109
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal <Decimal>
Sets the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Parameters:
<Decimal> DOT | COMMa
*RST: DOT
Example: See Example "User correction data exchange" on page 636 .
Manual operation: See "ASCII File Settings" on page 109
[:SOURce<hw>]:CORRection:DEXChange:EXECute
Executes the import or export of the selected correction list, according to the previously
set transfer direction with command [:SOURce<hw>]:CORRection:DEXChange:
MODE.
Example:
See Example "User correction data exchange" on page 636 .
SOURce subsystem