R&S SMA100B - Active Connections; Remote Connections Settings

Network operation and remote control
R&S
®
SMA100B
405User Manual 1178.3834.02 ─ 09
13.5.6 Remote connections settings
The "Remote Connections" dialog covers the active SCPI and TCP/IP connections,
and a history list of the connections that have accessed the instrument before.
13.5.6.1 Active connections
Access:
► Select "System Config > Remote Access > Remote Connections > Active".
The "Active " tab shows the currently active remote connections, and you can
enable the display of the active connections in the task bar.
Show Remote Connections in Taskbar
Displays the currently active connections in the taskbar.
SCPI Connections
Displays the VISA resources strings of the remote connections currently controlling the
instrument via the LAN interface.
Remote command:
n.a.
TCP/IP Connections
Displays the types and client addresses of the remote connections currently controlling
the instrument via the LAN interface.
Remote command:
n.a.
Remote access settings