R&S SMA100B - Pulse Generator

Analog modulations
R&S
®
SMA100B
98User Manual 1178.3834.02 ─ 09
2. Select "Pulse External / Trigger".
The "Pulse External / Trigger" dialog contains the parameters for configuring the
externally applied pulse and trigger signals.
Show Connector............................................................................................................98
Show Connector
Accesses a dialog that displays the physical location of the selected connector on the
front/rear panel of the instrument.
5.4.4 Pulse generator
Option: see Chapter 5.1, "Required options", on page 81.
Access:
► Select "Modulation" > "Pulse Modulation > Pulse Generator".
Modulation settings