R&S SMA100B - Configuring LAN Services

General instrument functions
R&S
®
SMA100B
368User Manual 1178.3834.02 ─ 09
Enabling a locked user interface for manual operation
Follow the instructions listed in "Unlocking (reactivating) the user interface for manual
operation" on page 375.
Remote command:
:SYSTem:ULOCk on page 719
:SYSTem:DLOCk on page 718
:SYSTem:KLOCk on page 719
12.4.3 Configuring LAN services
Access:
1. Select "System Config > Setup > Security > Security > LAN Services > Main Ser-
vices".
In the "Main Services" side tab, you can individually enable or disable the suppor-
ted LAN interface services.
2. Select "System Config > Setup > Security > Security > LAN Services > Samba Ser-
vices".
In the "Samba Services" side tab, you can activate older versions of the SMB client
and SMB server.
Using the security settings