R&S SMA100B - Source:roscillator Subsystem

Remote control commands
R&S
®
SMA100B
691User Manual 1178.3834.02 ─ 09
Return values:
<Upper> float
Increment: 0.01
Default unit: dBm
Example:
SOURce1:POWer:RANGe:UPPer?
// -15
SOURce1:POWer:RANGe:LOW?
// -50
Usage: Query only
Manual operation: See "Level Range" on page 77
[:SOURce<hw>]:POWer:RANGe:MIN?
[:SOURce<hw>]:POWer:RANGe:MAX?
Queries the current power range of the level sweep.
Return values:
<PowRangeMax> float
Range: depends on settings
Increment: 0.01
*RST: -10
Default unit: dBm
Example:
SOURce1:POWer:RANGe:MIN?
// -90
SOURce1:POWer:RANGe:MAX?
// 8
Usage: Query only
Manual operation: See "Sweep Level Range" on page 198
[:SOURce]:POWer:WIGNore <State>
Ignores level range warnings.
Parameters:
<State> 1 | ON | 0 | OFF
*RST: n.a. (factory preset: 0)
Example:
SOURce:POWer:WIGNore 1
14.16.12 SOURce:ROSCillator subsystem
The SOURce:ROSCillator subsystem contains the commands for setting the exter-
nal and internal reference frequency.
SOURce subsystem