R&S SMA100B - List Mode Data Exchange

Remote control commands
R&S
®
SMA100B
675User Manual 1178.3834.02 ─ 09
[:SOURce<hw>]:LIST:SELect <Filename>
Selects or creates a data list in list mode.
If the list with the selected name does not exist, a new list is created.
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example "Create an RF list and activate the list mode"
on page 665.
Manual operation: See "List Mode Data" on page 204
14.16.7.3 List mode data exchange
With the following commands, you can configure lists in ASCII format and export or
import them accordingly.
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?.......................................................... 675
[:SOURce<hw>]:LIST:DEXChange:EXECute.................................................................... 675
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension.........................................................676
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect..............................................................676
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn........................................... 676
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal........................................... 676
[:SOURce<hw>]:LIST:DEXChange:MODE........................................................................677
[:SOURce<hw>]:LIST:DEXChange:SELect....................................................................... 677
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?
Queries the available ASCII files for export or import of list mode data in the current or
specified directory.
Return values:
<Catalog> string
List of ASCII files *.txt or *.csv, separated by commas.
Example: See Example "List mode data exchange" on page 667.
Usage: Query only
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 110
[:SOURce<hw>]:LIST:DEXChange:EXECute
Executes the import or export of the selected list file, according to the previously set
transfer direction with command [:SOURce<hw>]:LIST:DEXChange:MODE
Example:
See Example "List mode data exchange" on page 667.
Usage: Event
SOURce subsystem