Network operation and remote control
R&S
®
SMA100B
414User Manual 1178.3834.02 ─ 09
– > = incoming command
– < = outgoing response to a query
– E = error message, highlighted by red color
– T = execution time, i.e. time required by the instrument to process the com-
mand internally.
●
"message": indicates the type of the message. Possible values and related mes-
sage contents are:
– > = incoming command
– < = outgoing response to a query
– E = error message, denoted in red
– T = execution time, i.e. time required by the instrument to process the com-
mand internally
13.6.2.3 Datasheet
The data sheet functionality allows you to retrieve the specification data of the instru-
ment at the time of delivery.
The document contains all specified value ranges and information of the data sheet, for
example important as reference values for recalibration.
13.7 Connecting the instrument to the network (LAN)
The R&S SMA100B is equipped with a network interface and can be connected to an
Ethernet LAN (local area network).
Connecting the instrument to the network (LAN)
To Next Page
Loading...
