R&S SMA100B - Mounting the R&S SMA100 B in a Rack

Getting started
R&S
®
SMA100B
28User Manual 1178.3834.02 ─ 09
Left = Stacked correctly, same dimensions
Middle = Stacked correctly, different dimensions
Right = Stacked incorrectly, too many products
4.
NOTICE! Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10 cm between the fan openings of the product
and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radiators
or other products.
3.1.4.2 Mounting the R&S SMA100B in a rack
To prepare the rack
1. Observe the requirements and instructions in "Setting up the product" on page 20.
2.
NOTICE! Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S SMA100B in a rack
1. Use an adapter kit that fits the dimensions of the R&S SMA100B to prepare the
instrument for rack mounting.
a) Order the rack adapter kit designed for the R&S SMA100B. For the order num-
ber, see data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2.
WARNING! The R&S SMA100B can be heavy, e.g., if fully equipped. Use a lifting
equipment, see also "Lifting and carrying the product" on page 19.
Lift the R&S SMA100B to shelf height.
3. Grab the handles at the front and push the R&S SMA100B onto the shelf until the
rack brackets fit closely to the rack.
Preparing for use