R&S SMA100B - Check Front Panel; Check Front Panel Settings

Maintenance, storage and disposal
R&S
®
SMA100B
768User Manual 1178.3834.02 ─ 09
2. Select "Security > Protection".
3. Enable the "Protection Level 1".
The default password is 123456.
4. Select "Setup > Maintenance > Date / Time".
5. Adjust the settings.
6. Close the dialogs.
The instrument adopts the new date and time.
17.3.3 Check front panel
Within this dialog, you can verify the functionality of the control keys.
How To: See Chapter 17.3.3.2, "How to test the front panel", on page 769
17.3.3.1 Check front panel settings
Access:
► Select "System Config > Setup > Maintenance > Check Front Panel".
Reflecting the front panel, the "Check Front Panel" dialog contains all functions to
test the operating elements of the instrument.
Performing maintenance tasks