R&S SMA100B - Setting up a Remote Control Connection over GPIB

Network operation and remote control
R&S
®
SMA100B
426User Manual 1178.3834.02 ─ 09
The connection to the instrument is set up and you can send remote-control com-
mands.
4. Telnet does not reflect your first entry.
Insert a command, e.g. *IDN and confirm with "Enter".
5. Observe the screen.
A response on the query confirms that the connection is working. The client dis-
plays all subsequent inputs and responses.
6. Even if the cursor is not visible on the screen, blindly enter a remote-control com-
mand. Confirm with Enter.
13.8.6 Setting up a remote control connection over GPIB
The program example in this section is written in VISUAL BASIC. A condition for pro-
gramming in VISUAL BASIC is that the modules NIGLOBAL (Niglobal.bas) and
VBIB32 (Vbib_32.bas) are added to the projects.
Controlling the R&S
SMA100B remotely