R&S SMA100B - How to Save a Hardcopy of the Power Analysis Window

Improving level performance
R&S
®
SMA100B
285User Manual 1178.3834.02 ─ 09
●
Vertical:
X/Y values of trace 1 in column 1 and 2,
X/Y values of trace 2 in column 3 and 4,
X/Y values of trace 3 in column 5 and 6,
X/Y values of trace 4 in column 7 and 8.
Example:
Trace1,X[Hz]; Trace1,Y[dBm]; Trace2,X[Hz]; Trace2,Y[dBm]; Trace3,X[Hz];
Trace3,Y[dBm]; Trace4,X[Hz]; Trace4,Y[dBm];
10000.0;-20.09;10000.0; -19.09;10000.0;21.09;10000.0;22.07;
10010.0;-19.17;10010.0;-18.17;10010.0; -20.17;10010.0; -20.14;
10020.0;-18.19;10020.0;-17.19;10020.0;-19.19;10020.0;-21.56;
10030.0; -15.43;10030.0; -14.43;10030.0;-16.43;10030.0;-17.67;...
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage:CSV:ORIentation
on page 519
Separator
Defines the character to be used to separate the values: tabulator, semicolon, comma
or blank.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage:CSV[:COLumn]:
SEParator on page 519
Decimal Point
Defines the character to be used as the decimal point of the values: dot or comma.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage:CSV:DPOint on page 518
Row Header
Defines a header for each row or column, depending on the orientation. A header con-
tains information on the trace, e.g. the trace index, or frequency, power or time values.
Example:
Trace=2;Source=detecting..;X[Hz]";"Trace=2;Source=detecting..;Y[dBm]"
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage:CSV:HEADer on page 518
How to save a hardcopy of the power analysis window
1. Select "Clk Syn/Power Sens" > "NRP Power Analysis".
2. In the diagram window, open the context-sensitive menu.
3. In the menu, select "Save... (Power Analysis)".
Using power sensors