R&S SMA100B - Page 519

Remote control commands
R&S
®
SMA100B
519User Manual 1178.3834.02 ─ 09
Manual operation: See "Row Header" on page 285
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage:CSV:ORIentation
<Orientation>
Defines the orientation of the X/Y value pairs.
Parameters:
<Orientation> HORizontal | VERTical
*RST: VERTical
Example:
SENS:SWE:HCOP:DEV:LANG CSV
Selects output format *.csv.
SENS:SWE:HCOP:DEV:LANG:CSV:ORI VERT
Selects vertical orientation, the value pairs are written in a col-
umn like structure (separated by the selected separator, e.g. tab)
Manual operation: See "Orientation" on page 284
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage:CSV[:COLumn]:SEParator
<Separator>
Defines which character is to separate the values, either tabulator, semicolon, comma
or blank.
Parameters:
<Separator> TABulator | SEMicolon | COMMa | BLANk
*RST: COMMa
Example:
SENS:SWE:HCOP:DEV:LANG CSV
Selects output format *.csv.
SENS:SWE:HCOP:DEV:LANG:CSV:SEP TAB
A tab separates the values.
Manual operation: See "Separator" on page 285
:SENSe[:POWer]:SWEep:HCOPy:DEVice:SIZE <Size>
Sets the size of the hardcopy in number of pixels. The first value of the size setting
defines the width, the second value the height of the image.
Parameters:
<Size> 320,240 | 640,480 | 800,600 | 1024,768
*RST: 320,240
Example:
SENS:SWE:HCOP:DEV:LANG BMP
Selects output format *.bmp.
SENS:SWE:HCOP:DEV:SIZE 320,240
The size of the bitmap is 320 pixels by 240 pixels.
Power sensor measurement subsystems