R&S SMA100B - IP Configuration; LAN Configuration

Network operation and remote control
R&S
®
SMA100B
410User Manual 1178.3834.02 ─ 09
– "Status" displays information about the LXI status of the instrument.
– "Utilities" provides access to the LXI event logging functionality required by
the LXI standard.
● "Instrument Control"
"Web Control" provides remote access to the instrument, see "Starting a
remote control via the LXI web browser" on page 420.
● "Diagnostics"
– "SCPI Remote Trace" records messages exchanged via the remote control
interface, see Chapter 13.6.2.2, "SCPI remote trace", on page 412.
● "Datasheet"
Provides the data sheet with the specification data of the instrument at the time
of delivery, see Chapter 13.6.2.3, "Datasheet", on page 414.
● "Help"
– "Glossary" explains terms related to the LXI standard.
– www.rohde-schwarz.com opens the Rohde & Schwarz homepage.
13.6.2.1 LAN configuration
The "LAN Configuration" web page displays all mandatory LAN parameters and allows
their modification.
It comprises the following navigation entries.
● IP configuration..................................................................................................... 410
● Advanced config....................................................................................................411
● Ping client..............................................................................................................412
IP configuration
The "IP configuration" web page displays all mandatory LAN parameters and allows
their modification.
The "IP Address Mode" selects a configuration mode for the IP address of the instru-
ment. With static configuration, the entered IP address, subnet mask, and default gate-
LXI settings