General instrument functions
R&S
®
SMA100B
357User Manual 1178.3834.02 ─ 09
See How to move a portable license for information on how to activate deactivated
licenses.
Installed License Keys Table ← Installed License Keys
Shows information on the currently installed options.
"Export License Key to File"
Opens a dialog to save the generated license key file. This file is
required during the unregistration process.
If you have a portable unregistered option, you can register it later on
another instrument (see How to move a portable license).
"Option"
Displays the option short designation.
Tip: Open the Hardware Options/Software Options dialog to retrieve
more information about the installed options.
"License Count"
Displays the number of the licenses for the selected option key.
"License Type"
Displays the type of license.
A license type determines the common qualification application dura-
tion and the portability of a license. The following license types are
provided: evaluation, permanent, portable, quantified, time-controlled
with a duration of 1, 3, 6 or 12 months. A license can also be deacti-
vated or expired.
For time limited licenses, the left time of applicability is displayed too.
"Registrations"
(reserved for future use)
Open License Server
Opens the R&S License Server of the R&S SMA100B, see Chapter 12.3.2, "Using the
license server", on page 357.
12.3.2 Using the license server
The R&S SMA100B now supports handling of software licenses using the license
server from Rohde & Schwarz.
The R&S License Server is a browser application you can access directly in the
R&S SMA100B. The onboard license server is integrated in the instrument firmware
with connection to a local smartcard memory. The local smartcard holds local licenses,
i.e. licenses used on this specific instrument.
To open the license server
Access:
1. Select "System Config > Setup > Instrument Assembly > Manage License Keys >
Installed License Keys".
Managing licenses and license keys
To Next Page
Loading...
