R&S SMA100B - Mmemory Subsystem

Remote control commands
R&S
®
SMA100B
456User Manual 1178.3834.02 ─ 09
Example:
SOUR:PRES
Presets all settings that are related to signal path
Usage: Event
:SYSTem:PRESet
Triggers an instrument reset. It has the same effect as:
●
The [Preset] key.
However, the command does not close open GUI dialogs like the key does.
●
The *RST command
For an overview of the settings affected by the preset function, see Table 11-1
Example:
SYST:PRES
All instrument settings (also the settings that are not currently
active) are reset to their default values.
Usage: Setting only
Manual operation: See "Preset" on page 313
:SYSTem:FPReset
Triggers an instrument reset to the original state of delivery.
Example:
SYST:FPR
All instrument settings (also the settings that are not currently
active) are reset to the factory values.
Usage: Event
Manual operation: See "Execute Factory Preset" on page 314
14.5 MMEMory subsystem
The MMEMory subsystem (Mass MEMory) contains the commands for managing files
and directories as well as for loading and saving complete instrument settings in files.
Mass storage location
Without any additional measures, the R&S SMA100B stores user files on the internal
memory, the removable memory, or if connected, on a memory stick.
Both, the user directory /var/user/ on the internal memory or the /usb/ directory
on the memory stick, can be used to preserve user-defined data. Any directory struc-
ture can be created.
The /var/volatile directory serves as a RAM drive and can be used to protect
sensitive information. The data is available temporarily.
MMEMory subsystem