R&S SMA100B - How to Find out the SCPI Commands for GUI Functions

Network operation and remote control
R&S
®
SMA100B
438User Manual 1178.3834.02 ─ 09
c) User code generator
A file system ("SCPI Recording Export - Select User Code Template") dialog
opens.
Select your user-defined code template. The code template must have file
extension *.expcodetmpl.
3. Select "File..."
The "SCPI Recording Export - Select Output File" dialog opens.
4. Select "New" and assign a filename for saving the recorded list.
5. In the "SCPI Recording Export" dialog, select "Export".
Saves the recorded data either in ASCII format (plain SCPI), or in the correspond-
ing format of the used code template, and shows the SCPI list in the "File Content"
section.
13.9.6 How to find out the SCPI commands for GUI functions
Finding out the SCPI command using "Show SCPI Command"
1. To find out the SCPI command of a parameter in manual operation, select the
respective parameter.
2. Open the context-sensitive menu and select "Show SCPI command"
You get the detailed command syntax, including the currently set value.
With the "Copy" function, you can conveniently paste the command including the
current setting, e.g., in a command script.
Finding out the SCPI command using the online help
If you are looking for the remote command to a function in manual operation, you find it
in the description of the online help.
1. To find out the SCPI command of a parameter in manual operation, select the
respective parameter.
2. To open the corresponding help topic, select one of the following:
● In the display, select "context-sensitive menu > Help".
Automating tasks with remote command scripts