R&S SMA100B - List Mode File Operation

Remote control commands
R&S
®
SMA100B
673User Manual 1178.3834.02 ─ 09
[:SOURce<hw>]:LIST:RUNNing?
Queries the current state of the list mode.
Return values:
<State> 1 | ON | 0 | OFF
1
Signal generation based on the list mode is active.
Example: See Example "Create an RF list and activate the list mode"
on page 665.
Usage: Query only
14.16.7.2 List mode file operation
The following section covers basic commands to file handling in list mode.
[:SOURce<hw>]:LIST:CATalog?.......................................................................................673
[:SOURce<hw>]:LIST:DELete..........................................................................................673
[:SOURce<hw>]:LIST:DELete:ALL................................................................................... 674
[:SOURce<hw>]:LIST:FREE?.......................................................................................... 674
[:SOURce<hw>]:LIST:RESet........................................................................................... 674
[:SOURce<hw>]:LIST:SELect.......................................................................................... 675
[:SOURce<hw>]:LIST:CATalog?
Queries the available list files in the specified directory.
Return values:
<Catalog> string
List of list filenames, separated by commas
Example: See Example "Create an RF list and activate the list mode"
on page 665.
Usage: Query only
Manual operation: See "List Mode Data" on page 204
[:SOURce<hw>]:LIST:DELete <Filename>
Deletes the specified list.
Setting parameters:
<Filename> string
Filename or complete file path; file extension is optional.
Example: See [:SOURce<hw>]:LIST:DELete:ALL on page 674.
Usage: Setting only
Manual operation: See "List Mode Data" on page 204
SOURce subsystem