R&S SMA100B - Creating Screenshots of Power Analysis Settings; Save (Power Analysis) Settings

Improving level performance
R&S
®
SMA100B
280User Manual 1178.3834.02 ─ 09
8.4.4.7 Creating screenshots of power analysis settings
The power analysis save function enables you to save current settings in a file. To
document the most important settings for a performed signal generation, you can also
save a hardcopy of the current display.
Save (Power analysis) settings
In the "Save …" dialog you can find the settings to store a screenshot of the current
measurement diagram. The current screen shot is stored as indicated, that means with
or without marker indication.
Main settings
Access:
1. Select "Clk Syn/Power Sens" > "NRP Power Analysis".
2. In the diagram window, open the context-sensitive menu.
3. In the menu, select "Save... (Power Analysis)".
File name - Power Analysis
Indicates the file name and directory.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy[:EXECute] on page 524
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME] on page 520
Using power sensors