Improving level performance
R&S
®
SMA100B
281User Manual 1178.3834.02 ─ 09
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:STATe on page 521
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:FILE? on page 521
Format - Power Analysis
Selects the file format.
Several bitmap graphic formats are offered. In addition, format *.csv is available
which stores the measurement values as ASCII data.
You can refine the csv settings further, see "CSV options" on page 283.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage on page 518
Options
Opens a dialog to select the screenshot format and also to activate and select the
automatic naming settings.
Common settings
Access:
1. Select "Clk Syn/Power Sens" > "NRP Power Analysis".
2. In the diagram window, open the context-sensitive menu.
3. In the menu, select "Save... (Power Analysis)".
4. Select "Options".
Automatic Naming
If enabled, the file names are created by selected rules. The filename includes at least
one number and optionally additional information.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:STATe on page 521
Format - Power Analysis
Selects the file format.
Several bitmap graphic formats are offered. In addition, format *.csv is available
which stores the measurement values as ASCII data.
Using power sensors
To Next Page
Loading...
