Avionic standards
R&S
®
SMA100B
142User Manual 1178.3834.02 ─ 09
Symbol Space
Requires "Time Schema > User".
Sets the length of the Morse code symbol space.
Remote command:
[:SOURce<hw>]:VOR:COMid:SYMBol on page 629
Letter Space
Requires "Time Schema > User".
Sets the length of a Morse code letter space.
Remote command:
[:SOURce<hw>]:VOR:COMid:LETTer on page 629
6.4 ILS configuration and settings
Option: R&S SMAB-K25
Access:
► Select "Modulation > Avionic Standards > ILS".
The remote commands required to define ILS settings are described in Chap-
ter 14.16.2.4, "SOURce:ILS subsystem", on page 603.
Settings
● General settings....................................................................................................142
● ILS glide slope settings......................................................................................... 145
● ILS localizer settings............................................................................................. 151
● ILS marker beacons settings.................................................................................160
6.4.1 General settings
This chapter comprises general settings, which are common for all ILS components.
ILS configuration and settings
To Next Page
