R&S SMA100B - Shutting down and Rebooting the Instrument

General instrument functions
R&S
®
SMA100B
377User Manual 1178.3834.02 ─ 09
History List
Lists the performed actions, provided "Undo/Redo" state is "On".
Clear History
Deletes the recorded list of the performed steps.
Apply
Performs the "Undo/Redo".
If you select a previously performed action of the list, all subsequent actions are
undone. The list entries remain.
If you select a subsequently executed action, you can restore all the actions undone up
to this state.
12.6 Shutting down and rebooting the instrument
The [On/Standby] front panel key switches the instrument from the standby to the
ready state or vice versa. In remote operation from a remote computer or in manual
control, there is another possibility to shut down the instrument or to reboot the system.
Access:
► Select "System Config > Setup > Maintenance > Shut Down".
●
:SYSTem:REBoot on page 736
●
:SYSTem:SHUTdown on page 736
Shutting down and rebooting the instrument