R&S SMA100B - Password Management

General instrument functions
R&S
®
SMA100B
370User Manual 1178.3834.02 ─ 09
"Software Update"
Allows updating the software.
Samba Services
Activate or deactivate support of SMB client and SMB server version 1.0 and 2.0 of the
SMB protocol.
Support of version 1.0 and 2.0 is additional to the current SMB protocol version sup-
ported in the firmware. This firmware supports SMB protocol versions up to version 4.
SMB 1.0/2.0 Client ← Samba Services
Activates support of the SMB client compatible with SMB protocol versions 1.0 and 2.0.
SMB 1.0/2.0 Server ← Samba Services
Activates support of the SMB server compatible with SMB protocol versions 1.0 and
2.0.
Security Password
Enters the password that is required to enable or to disable the settings protected by a
security password. Default is 123456.
How to:
●
"Disabling the LAN interface" on page 374
●
"Disabling LAN services" on page 374
●
"Changing the default security password" on page 374.
Accept
Applies the modified settings, provided the security password is entered and correct.
12.4.4 Password management
Access:
1. Select "System Config > Setup > Security > Security > Password Management >
User Password".
Using the security settings