R&S SMA100B - Closed Connections; QR Code

Network operation and remote control
R&S
®
SMA100B
406User Manual 1178.3834.02 ─ 09
13.5.6.2 Closed connections
Access:
► Select "System Config > Remote Access > Remote Connections > Closed".
The "Closed" tab shows the currently active remote connections, and you can
enable the display of the active connections in the task bar.
SCPI Connections
Lists the VISA resource strings of the last remote connections that have accessed the
instrument via the LAN interface before.
Remote command:
n.a.
TCP/IP Connections
Lists the types and client addresses of the last remote connections that had accessed
the instrument via the LAN interface before.
Remote command:
n.a.
13.5.7 QR code
Access:
► Select "System Config > Remote Access > QR Code".
Remote access settings