R&S SMA100B - Overview

Analog modulations
R&S
®
SMA100B
122User Manual 1178.3834.02 ─ 09
Remote command:
n.a.
Noise Level
Access:
●
Select "Modulation" > "Output > Noise Level".
Noise Density ← Noise Level
Indicates the level of the noise signal for a bandwidth of 1 Hz (relative).
Remote command:
[:SOURce<hw>]:NOISe:LEVel:RELative? on page 678
Noise Level ← Noise Level
Indicates the level of the noise signal per Hz within the total bandwidth (absolute).
Remote command:
[:SOURce<hw>]:NOISe:LEVel[:ABSolute]? on page 679
5.4.9 Overview
Option: AM and FM/PM require R&S SMAB-K720
Modulation settings