R&S SMA100B - COM;ID Settings

Avionic standards
R&S
®
SMA100B
140User Manual 1178.3834.02 ─ 09
6.3.4 COM/ID settings
Access:
► Select "VOR > COM/ID"
This dialog comprises COM/ID signal settings related to the VOR signal.
Settings
COM/ID State..............................................................................................................140
Code............................................................................................................................140
Period..........................................................................................................................141
Frequency................................................................................................................... 141
Depth...........................................................................................................................141
Time Schema.............................................................................................................. 141
Dot Length...................................................................................................................141
Dash Length................................................................................................................141
Symbol Space.............................................................................................................142
Letter Space................................................................................................................142
COM/ID State
Enables/disables the COM/ID signal.
See also Chapter D, "Morse code settings", on page 784.
Remote command:
[:SOURce<hw>]:VOR:COMid[:STATe] on page 630
Code
Sets the coding of the COM/ID signal by the international short name of the airport
(e.g. MUC for the Munich airport).
VOR configuration and settings