R&S SMA100B - LXI Settings; LXI Status Settings

Network operation and remote control
R&S
®
SMA100B
407User Manual 1178.3834.02 ─ 09
The "QR Code" dialog shows the current instrument address (IP address) in quick
response (QR) format.
This functionality provides fast access to the instrument via VNC with, for example, a
smartphone or a tablet.
See Chapter 13.10.3, "How to set up remote operation from a smart device",
on page 442.
13.6 LXI settings
On the R&S SMA100B, an LXI functionality is already installed and enabled, see LXI
status settings. Thus, you can access he instrument using any web browser to perform
the following tasks:
●
Modifying network configurations, see Chapter 13.6.2.1, "LAN configuration",
on page 410.
●
Accessing the instrument remotely
●
Analyzing SCPI remote diagnostics
13.6.1 LXI status settings
Access:
► Select "System Config > Setup > Remote Access > LXI Status".
LXI settings