R&S SMA100B - Rear Panel Tour

Getting started
R&S
®
SMA100B
43User Manual 1178.3834.02 ─ 09
3.2.2 Rear panel tour
This section provides an overview of the connectors at the rear panel of the instrument.
For technical data of the connectors, refer to the data sheet.
1 2 3 4 5 6 7 8 9 10 11 12 13
1415
16171819
Figure 3-5: R&S SMA100B rear panel with height unit 2HU (option R&S SMAB-B92)
1 = Serial number (six digits in the string 1419.8888.02-<serial number>-<checksum>)
2 = IEC 625/IEEE 488, page 44
3, 5 = USB/USB In, page 44
4 = LAN, page 44
6, 7 = Ref In/Ref Out, page 45
8 = V/GHz X-Axis, page 44 and Z-Axis, page 44
9 = Stop, page 45
10 = EFC, page 45
11 = Marker User1, page 45
12 = Inst Trig, page 45
13 = Signal Valid, page 45
14 = Clk Syn/Clk Syn N, page 42
15 = Pulse Sync, page 45, Pulse Video, page 42 and Pulse Ext, page 42
16 = LF, page 42
17 = Ext 1/2, page 46
18 = AC power supply connector and switch, page 46
19 = RF, page 46
1
2
1 2 3 4 5 7 8 9 10 131211
141516171819
6
Figure 3-6: Rear panel view of the R&S SMA100B RF Signal Generator with height unit 3HU (option
R&S SMAB-B93)
1 = Serial number (six digits in the string 1419.8888.02-<serial number>-<checksum>)
2 = IEC 625/IEEE 488, page 44
3, 5 = USB/USB In, page 44
4 = LAN, page 44
6, 7 = Ref In/Ref Out, page 45
Instrument tour