R&S SMA100B - Correction Data Exchange

Remote control commands
R&S
®
SMA100B
640User Manual 1178.3834.02 ─ 09
Return values:
<Catalog> string
List of list filenames, separated by commas
Example: See Example "Create a table with user-defined correction values
for the RF level" on page 635 .
Usage: Query only
Manual operation: See "UCOR Data" on page 225
[:SOURce]:CORRection:CSET:DELete
<Filename>
Deletes the specified user correction list file.
Setting parameters:
<Filename> string
Filename or complete file path; file extension is optional.
Example: See Example "Create a table with user-defined correction values
for the RF level" on page 635 .
Usage: Setting only
Manual operation: See "UCOR Data" on page 225
14.16.3.2 Correction data exchange
With the following commands, you can configure user correction lists and export or
import them accordingly.
[:SOURce<hw>]:CORRection:DEXChange:AFILe:CATalog?
Queries the available ASCII files for export or import of user correction data in the cur-
rent or specified directory.
Return values:
<Catalog> string
List of ASCII files *.txt or *.csv, separated by commas.
Example: See Example "Create a table with user-defined correction values
for the RF level" on page 635 .
Usage: Query only
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 110
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension <Extension>
Determines the extension of the ASCII files for file import or export, or to query existing
files.
SOURce subsystem