R&S SMA100B - Automatic Naming

Remote control commands
R&S
®
SMA100B
486User Manual 1178.3834.02 ─ 09
Parameters:
<Name> string
Example: See Example "Store a hard copy of the display" on page 484
Manual operation: See "File..." on page 337
:HCOPy[:EXECute]
Generates a hard copy of the current display. The output destination is a file.
Example: See Example "Store a hard copy of the display" on page 484
Usage: Event
Manual operation: See "Save" on page 338
14.11.2 Automatic naming
Use the following commands to automatically assign a file name.
:HCOPy:FILE[:NAME]:AUTO?.........................................................................................486
:HCOPy:FILE[:NAME]:AUTO:DIRectory........................................................................... 486
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar................................................................. 487
:HCOPy:FILE[:NAME]:AUTO:FILE?................................................................................. 487
:HCOPy:FILE[:NAME]:AUTO:STATe.................................................................................487
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe................................................................487
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe...........................................................487
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe............................................................. 487
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer?..................................................................488
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix..................................................................... 488
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe........................................................... 488
:HCOPy:FILE[:NAME]:AUTO?
Queries path and file name of the hardcopy file, if you have enabled Automatic Nam-
ing.
Return values:
<Auto> string
Example: See Example "Store a hard copy of the display" on page 484
Usage: Query only
:HCOPy:FILE[:NAME]:AUTO:DIRectory <Directory>
Determines the path to save the hard copy, if you have enabled Automatic Naming.
If the directory does not yet exist, the instrument automatically creates a new directory,
using the instrument name and /var/user/ by default.
HCOPy subsystem