R&S SMA100B - Page 485

Remote control commands
R&S
®
SMA100B
485User Manual 1178.3834.02 ─ 09
:HCOPy:DATA?..............................................................................................................485
:HCOPy:IMAGe:FORMat................................................................................................ 485
:HCOPy:DEVice:LANGuage............................................................................................485
:HCOPy:REGion............................................................................................................ 485
:HCOPy:FILE[:NAME].....................................................................................................485
:HCOPy[:EXECute]........................................................................................................ 486
:HCOPy:DATA?
Transfers the hard copy data directly as a NByte stream to the remote client.
Return values:
<Data> block data
Example: See Example "Store a hard copy of the display" on page 484
Usage: Query only
:HCOPy:IMAGe:FORMat
<Format>
:HCOPy:DEVice:LANGuage <Language>
Selects the graphic format for the hard copy. You can use both commands alterna-
tively.
Parameters:
<Language> BMP | JPG | XPM | PNG
*RST: PNG
Example: See Example "Store a hard copy of the display" on page 484
Manual operation: See "Format" on page 338
:HCOPy:REGion <Region>
Selects the area to be copied.
You can create a snapshot of the screen or an active dialog.
Parameters:
<Region> ALL | DIALog
*RST: ALL
Example: See Example "Store a hard copy of the display" on page 484
Manual operation: See "Region" on page 338
:HCOPy:FILE[:NAME] <Name>
Determines the file name and path to save the hard copy, provided automatic naming
is disabled.
Note: If you have enabled automatic naming, the instrument automatically generates
the file name and directory, see Chapter 14.11.2, "Automatic naming", on page 486.
HCOPy subsystem