R&S SMA100B - Page 282

Improving level performance
R&S
®
SMA100B
282User Manual 1178.3834.02 ─ 09
You can refine the csv settings further, see "CSV options" on page 283.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:DEVice:LANGuage on page 518
Automatic naming settings
Access:
1. Select "Clk Syn/Power Sens" > "NRP Power Analysis".
2. In the diagram window, open the context-sensitive menu.
3. In the menu, select "Save... (Power Analysis)".
4. Select "Options".
5. In the "Save NRP-Z Analysis Options" dialog, enable "Automatic Naming."
Path
Sets the directory for saving the files.
Remote command:
:SENSe[:POWer]:SWEep:HCOPy:FILE[:NAME]:AUTO:DIRectory on page 520
Clear Parth
Deletes all image files with extensions "bmp", "img", "png", "xpm" and "csv" in the
directory set for automatic naming.
Using power sensors