R&S SMA100B - Page 674

Remote control commands
R&S
®
SMA100B
674User Manual 1178.3834.02 ─ 09
[:SOURce<hw>]:LIST:DELete:ALL
Deletes all lists in the set directory.
This command can only be executed, if:
●
No list file is selected.
●
List mode is disabled.
Example:
SOUR1:LIST:CAT?
// list,my_list
SOUR1:LIST:DEL "/var/user/list1"
SOUR1:LIST:CAT?
// my_list
SOUR1:FREQ:MODE?
// LIST
SOUR1:LIST:SEL?
// /var/user/my_list.lsw
//deactivate list mode
SOUR1:FREQ:MODE CW
SOUR1:LIST:DELete:ALL
SOUR1:LIST:CAT?
// -
// all list files are deleted
Usage:
Event
Manual operation: See "List Mode Data" on page 204
[:SOURce<hw>]:LIST:FREE?
Queries the amount of free memory (in bytes) for list mode lists.
Return values:
<Free> integer
Range: 0 to INT_MAX
*RST: 0
Example: See Example "Create an RF list and activate the list mode"
on page 665.
Usage: Query only
[:SOURce<hw>]:LIST:RESet
Jumps to the beginning of the list.
Example:
See Example "Create an RF list and activate the list mode"
on page 665.
Usage: Event
Manual operation: See "Reset" on page 204
SOURce subsystem