R&S SMA100B - Page 413

Network operation and remote control
R&S
®
SMA100B
413User Manual 1178.3834.02 ─ 09
A recorded trace (message log) can be evaluated directly in the dialog. Use the high-
lighting and navigation functions provided by the lower toolbar to locate error mes-
sages and messages containing arbitrary search strings. You can also export the mes-
sage log to a *.csv file and evaluate the file using a suitable program.
To trace and display messages, switch on "logging" and "live mode" in the toolbar.
Toolbars
The toolbar at the top of the dialog provides basic settings and functions.
●
"Live mode" / "logging": If logging is switched on, messages are traced. They are
stored in an internal database and can be displayed upon request, using the
refresh button (live mode off) or they can be displayed automatically (live mode
on).
●
"Filter": applies a filter to columns and/or rows when working (live mode off)
●
"Refresh": reads the message log from the internal database and displays it
●
"Download": stores the SCPI trace log to a *.csv file
●
"Clear": deletes all message log entries in the database and at the screen
●
"Details": displays details of the selected message, for example an SCPI command
in hex format (also possible by double\-clicking a message)
Columns
The following columns are available if no column filter is applied:
●
"Rec": record number of the message within the message log
●
I: number of the subinstrument
●
"MT": indicates the type of the message. Possible values and related message
contents are:
LXI settings