Improving level performance
R&S
®
SMA100B
248User Manual 1178.3834.02 ─ 09
Context-sensitive menu
A context-sensitive menu also provides access to the configuration dialogs and some
additional functions.
Access:
► Touch and hold a spot in the power analysis diagram for at least 1 second to
access the context-sensitive menu.
Figure 8-6: Power analysis context-sensitive menu
In the context-sensitive menu you can access:
●
"Start Continuous/Stop": Triggers / stops the power analysis measurement
Note: During a measurement in the frequency domain, or the power domain
respectively, the displayed frequency/power value in the status bar (home screen)
does not correspond to the value applied at the output. Therefore, the
R&S SMA100B displays asterisks instead of the frequency or power value during
the measurement and indicates the original value again when the measurement is
completed or aborted.
●
"Next Window (Hardkey)": Switches between the measurement views that are
enabled in the following order:
– "Standard View"
– "Marker View"
– "Pulse Data View"
– "Full Screen"
At least one viewing mode has to be selected. For details on the different view
modes, see "Next window list" on page 276.
●
"Configure...": opens a dialog for configuring the power analysis measurement. See
Chapter 8.4.4.6, "NRP-Z configure settings", on page 255.
●
"Trace/Markers...": opens a dialog for configuring the traces/marker. See Chap-
ter 8.4.4.5, "NRP-Z traces/markers settings", on page 249.
●
"Save...(Power Analysis)": opens a dialog to save a hardcopy of the measurement.
See Chapter 8.4.4.7, "Creating screenshots of power analysis settings",
on page 280.
Power Analysis Diagram
Indicates the measurement results graghically, including configured markers, functions,
etc.
Using power sensors
To Next Page
Loading...
