R&S SMA100B - Page 293

Improving level performance
R&S
®
SMA100B
293User Manual 1178.3834.02 ─ 09
4. Load the file with "Select".
5. To view the file content, select "Edit UCOR Data...".
6. Select "UCOR Data" > "State" > "On" to apply the user correction values.
When you activate the RF output, the R&S SMA100B considers the user correction
data and adjusts the signal level accordingly to compensate external frequency
responses.
How to calibrate the power level with an R&S NRP power sensor