R&S SMA100B - Page 441

Network operation and remote control
R&S
®
SMA100B
441User Manual 1178.3834.02 ─ 09
Setting up the VNC connection on a Windows desktop client
1. Install the VNC viewer program component on the remote computer.
a) On the Internet, select a VNC client program and download it onto your PC.
For example the free of charge software Ultr@VNC (vncviewer.exe is avail-
able, see http://www.uvnc.com/download/index.html.
b) Execute the VNC client installation.
c) Select the VNC viewer program component and follow the installation instruc-
tions.
2. Start VNC viewer program component on the PC.
3. Select "VNC Server" and enter the IP address of the instrument.
4. To initialize the connection, select "Connect".
A dialog opens requesting the password.
5. Enter the password and confirm with "OK".
The default password is instrument.
After the connection is established, the current screen of the signal generator is
displayed and the instrument can be remotely operated from the remote computer.
Terminating VNC connection
► Perform one of the following:
a) On an external Unix/Linux PC, close the Internet browser or the signal genera-
tor window.
Operating the R&S
SMA100B remotely using VNC