R&S SMA100B - Page 464

Remote control commands
R&S
®
SMA100B
464User Manual 1178.3834.02 ─ 09
:MMEMory:DCATalog? <path>
Returns the subdirectories of a particular directory.
Query parameters:
<path> String parameter to specify the directory. If the directory is omit-
ted, the command queries the content of the current directory,
queried with :MMEMory:CDIRectory command.
Return values:
<Catalog> <file_entry>
Names of the subdirectories separated by colons. The first two
strings are related to the parent directory.
Usage: Query only
:MMEMory:DCATalog:LENGth? [<Path>]
Returns the number of subdirectories in the current or specified directory.
Query parameters:
<Path> String parameter to specify the directory. If the directory is omit-
ted, the command queries the contents of the current directory,
to be queried with :MMEMory:CDIRectory command.
Return values:
<DirectoryCount> integer
Number of parent and subdirectories.
Usage: Query only
:MMEMory:DELete <Filename>
Removes a file from the specified directory.
Setting parameters:
<Filename> string
String parameter to specify the name and directory of the file to
be removed.
Usage: Event
SCPI confirmed
Manual operation: See "Cut, Copy&Paste and Delete" on page 326
:MMEMory:LOAD:STATe <SavRclStateNumb>, <file_name>
Loads the specified file stored under the specified name in an internal memory.
After the file has been loaded, the instrument setting must be activated using an *RCL
command.
MMEMory subsystem