R&S SMA100B - Page 721

Remote control commands
R&S
®
SMA100B
721User Manual 1178.3834.02 ─ 09
:SYSTem:SAV <Pathname>
Saves the current R&S SMA100B settings into a file with defined filename and into a
specified directory. The file extension (*.savrcltxt) is assigned automatically.
Setting parameters:
<Pathname> string
Example:
SYSTem:SAV "/var/user/temp/Test"
Saves the file Test.savrcltxt into the direc-
tory /var/user/temp/.
Usage: Setting only
:SYSTem:RCL
<Pathname>
Loads a file with previously saved R&S SMA100B settings.
Loads the selected file with previously saved R&S SMA100B settings from the default
or the specified directory. Loaded are files with extension *.savrcltxt.
Setting parameters:
<Pathname> string
Example:
SYSTem:RCL "/var/user/temp/Test"
Loads the file Test.savrcltxt from the direc-
tory /var/user/temp/.
Usage: Setting only
:SYSTem:PROTect<ch>[:STATe] <State>[, <Key>]
Activates and deactivates the specified protection level.
Suffix:
<ch>
.
Indicates the protection level.
See also "Protection" on page 361
Parameters:
<State> 1 | ON | 0 | OFF
*RST: n.a. (factory preset: 1)
Setting parameters:
<Key> integer
The respective functions are disabled when the protection level
is activated. No password is required for activation of a level.
A password must be entered to deactivate the protection level.
The default password for the first level is 123456.
This protection level is required to unlock internal adjustments
for example.
SYSTem subsystem