R&S SMA100B - Page 756

Troubleshooting and notifications
R&S
®
SMA100B
756User Manual 1178.3834.02 ─ 09
2. Select "Hardware Options".
The dialog lists all hardware options that are installed on the R&S SMA100B.
Proceed the same way to get information for instance on the firmware, or the installed
software options in the corresponding tab.
Checking the RF hardware assembly
To find out the installed RF hardware:
1. Select "System Config > Setup > Instrument Assembly > Hardware Config".
2. Select "RF Assembly".
The dialog lists the RF hardware components that are installed on the
R&S SMA100B.
Requesting instrument configuration and specifications