Error Codes
D0C5/D0C6/D0C4/D0AP FAX UNIT 28 SM
Code Meaning Suggested Cause/Action
of space remaining on the HDD where the
target folder is located.
• Insufficient free space on the HDD at the
target destination for SMTP direct sending.
Contact the system administrator and check
the amount of space remaining on the target
HDD.
14-06 User Not Found on SMTP Server
(551)
• The designated user does not exist.
• The designated user does not exist on the
SMTP server.
• The designated address is not for use with
direct SMTP sending.
14-07 Data Send to SMTP Server Failed
(4XX)
• Failed to access the SMTP server because
the transmission failed.
• PC not operating correctly.
• SMTP server operating incorrectly
• Network not operating correctly.
• Destination folder setting incorrect.
• Direct SMTP sending not operating correctly.
14-08 Data Send to SMTP Server Failed
(5XX)
• Failed to access the SMTP server because
the transmission failed.
• SMTP server operating incorrectly
• Destination folder setting incorrect.
• Direct SMTP sending not operating correctly.
• Software application error.
14-09 Authorization Failed for Sending to
SMTP Server
• POP-Before-SMTP or SMTP authorization
failed.
• Incorrect setting for file transfer
14-10 Addresses Exceeded
• Number of broadcast addresses exceeded
the limit for the SMTP server.
14-11 Buffer Full
• The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
14-12 Data Size Too Large
• Transmission was cancelled because the
detected size of the file was too large.
14-13 Send Cancelled
• Processing is interrupted because the user
pressed Stop.
To Next Page
