Bit Switches – 1
D0C5/D0C6/D0C4/D0AP FAX UNIT 58 SM
used when the machine is in the Energy Saver mode.
2-3 Not used Do not change these settings.
4-5 Interval for preventing the machine
from entering Energy Saver mode
if there is a pending transmission
file.
If there is a file waiting for transmission, the machine
does not go to Energy Saver mode during the selected
period.
After transmitting the file, if there is no file waiting for
transmission, the machine goes to the Energy Saver
mode.
Bit 5 Bit 4 Setting
0 0 1 min
0 1 30 min
1 0 1 hour
1 1 24 hours
6-7 Not used Do not change the settings.
System Switch 16 (SP No. 1-101-023)
No Function Comments
0 Parallel
Broadcasting
0: Disabled
1: Enabled
1: The machine sends messages simultaneously using all available
ports during broadcasting.
NOTE: If a customer wants to keep a line available for fax reception or
other reasons, select "0" (Disable).
1-7 Not used Do not change these settings.
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19 (SP No. 1-101-026)
No Function Comments
0-5 Not used Do not change the settings.
6 Extended scanner
page memory after
memory option is
installed
0: Disabled
1: Enabled
0: After installing the memory expansion option, the scanner page
memory is extended to 4 MB from 2 MB.
1: If this bit is set to 1 after installing the memory expansion option,
the scanner page memory is extended to 12 MB. But the SAF
memory decreases to 18 MB.
7* Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit a form or
letterhead which has a colored or printed background, change this
bit to "1". "Original 1" and "Original 2" can be selected in addition to
the "Text", "Text/Photo" and "Photo" modes.
* This setting can be used for the client machine which has no FCU.
System Switch 1A (SP No. 1-101-027)
To Next Page
