Shimadzu GC-2010 Plus User Manual

8 Setting the Analytical Parameters and File Management
8.2 File Management
88
GC-2010 Plus
8.2.3 Copying a file
Select [Copy] (PF menu) on the file list screen to display the file copy screen shown in Fig. 8.2.2.
Enter the source file number (Src. File) and the destination File number (Dst. File), then press
[Copy] (PF menu). The name and contents of the source file are copied to the destination file.
8.2.4 Renaming a file
Select [Rename] (PF menu) on the file list screen to display the file rename screen shown in
Fig. 8.2.3. Move the cursor using the [ △ ] and [ ▽ ] keys to select the file to be renamed.
Enter the new file name using the numeric keys and the [ ] and [ ] keys. Refer to “5.3.5
Changing item names” for more information..
Fig. 8.2.2 Copying File
Fig. 8.2.3 Renaming a file
△
△

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD