Shimadzu GC-2010 Plus - Setting the Date and Time

16 Special Functions
16.6 GC Configuration
241
GC-2010 Plus
TEMPERATURE OFFSET
Set the temperature offset for each heated zone.
OTHER CONFIGURATIONS
Specify the configuration of miscellaneous setup items.
16.6.3 Setting the date and time
16.6.3.1 Screen description
Select “6. GC CONFIGURATION” from the [FUNC] key screen, and then select “1.
DATE/TIME SETTING”,to display the Date/Time setting screen shown in Fig. 16.6.2.
The date and the time can be set. This setting is automatically saved, even when the
GC power is off.
16.6.3.2 Parameter list
DATE
Range: 2000.01.01−2099.12.31
TIME
Range: 00:00:00−23:59:59
Fig. 16.6.2 Date/time setup screen
The current date and time
are displayed.