5 Basic Key Operation
5.3
5.
58
GC-2010 Plus
5.3Basic Key Operations
5.3.1 Screen display
Use the following 10 keys to display the parameter and status screens:
[DIAG], [SYSTEM], [MONIT], [SET], [FUNC], [COL], [FLOW], [INJ], [DET] and [OPTION].
Access the main function screens by pressing one of these keys, then the secondary
screens by selecting a PF menu item displayed at the bottom of the screen. (Because the
PF menu includes direct operations, some PF menu items do not have secondary screens.)
Q PF menu item selection
Select a desired PF menu item by pressing the PF keys ([PF1], [PF2] and [PF3]) underneath
the screen, which correspond to PF menu items.
Fig. 5.3.1
If the PF menu continues over two or more pages, press the [Toggle] key to display the
desired PF menu, then press the [PF] key.
Example:
1st page of PF menu
Press the [Toggle] key to display the 2nd page.
PF1 PF2 PF3
MONIT SET
ON
PF menu
PF key
[Toggle] key
File LineConfg Customiz
Indicates page 1.
Indicates page 2.
PF menu
PF key
Toggle key
To Next Page
Loading...
