Shimadzu GC-2010 Plus - Service and Maintenance; Screen Description; Parameter List

16 Special Functions
16.7
16.
259
GC-2010 Plus
16.7Service and Maintenance
16.7.1 Screen description
Select “7. SERVICE/MAINTENANCE” from the [FUNC] key screen to display the Service/
Maintenance screen shown in Fig. 16.7.1.
16.7.2 Parameter list
INSTALLATION (POSITION)
Specify the heated zone locations for installed components.
INSTALLATION (PIPING)
Set the installation status of the carrier gas and the detector gas flow controllers.
INITIALIZE
Initialize the RAM, configuration, and installation settings.
POWER CONSUMPTION
Displays the power consumption of all heated zones.
SERVICE
Reserved for the use of shimadzu service personnel during maintenance or inspections.
Fig. 16.7.1 Service/maintenance menu screen