Shimadzu GC-2010 Plus User Manual

13.1
13.13.
149
GC-2010 Plus
13 Detector
13.1Introduction
Q Detectors
This manual describes the operating of an FID and TCD. Consult the Instruction Manual for infor-
mation on other types of detectors. Common GC detectors are listed below.
・ Hydrogen flame ionization detector (FID)
・ Thermal conductivity detector (TCD)
・ Electron capture detector (ECD) (option)
・ Flame thermionic detector (FTD) (option)
・ Flame photometric detector (FPD) (option)

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD