15 Optional Devices
15.1 Auto Injector Parameters
200
GC-2010 Plus
15.1.4 AOC priority analysis
Select [Priority] (PF menu) from the AOC main screen to display the AOC priority sample
screen shown in Fig. 15.1.2.
The batch can only be interrupted when the AOC is operating.
Enter the sample injection No., and press [Set] (PF menu).
15.1.5 Parameter list
INJECTION SAMPLE
INJECTION SAMPLE NUMBER
NOTE Enter the sample vial No. designated for priority analysis.
・ When an auto sampler carousel is not in use,
Short rack No. 1−6
Long rack No. 1−12 (1-15 allowable, with an additional rack)
・ When an auto sampler corousel is installed, No. 1−150 (maximum; for 1.5 mL vial)
No. 1−96 (maximum; for 4.0 mL vial)
When an auto sampler carousel, the allowable vial No. range depends on the vial rack type
and the number of racks. A valve of 0 (default) indicates no priority sample.
Fig. 15.1.2 Priority analysis setup screen
To Next Page
Loading...
