Shimadzu GC-2010 Plus User Manual

8 Setting the Analytical Parameters and File Management
8.1 [SET] Key Main Screen
86
GC-2010 Plus
8.1.3 PF menu
PF menu Description
Reference
section
File
Displays file list to change the current file.
On this sub screen, you can select files to load, copy, initialize and rename.
8.2
Line Confg
Specifies the injection port, detectors and options which make up the ana-
lytical flow line.
Units set on this sub screen are displayed on the [SET] key main screen.
8.3
Customiz Set the parameters displayed on the [SET] key main screen. 8.4
Print Prints temperature, pressure and total flow rate on a Chromatopac.
――
Next Line
Switches through each of the parameter screens in turn. Press the [SET]
key from the [SET] key main screen to switch to the next screen.
――

Shimadzu GC-2010 Plus Specifications

General

Type	Gas Chromatograph
Model	GC-2010 Plus
Manufacturer	Shimadzu
Maximum Temperature Ramp Rate	120 °C/min
Detector Options	FID, TCD, ECD, FPD, NPD, MS
Electronic Flow Control (EFC)	Yes
Data Sampling Rate	Up to 250 Hz
Column Oven Temperature Range	Ambient +5°C to 450°C
Maximum Oven Heating Rate	120 °C/min
Injection Port	Split/Splitless, PTV
Display	LCD