Shimadzu GC-2010 Plus - Setting the aux APC Parameters; Screen Description

15 Optional Devices
15.3
15.
207
GC-2010 Plus
15.3Setting the AUX APC Parameters
The pressure, the flow rate and the gas type can be set for the AUX APC.
15.3.1 Screen description
If an AUX APC is installed, press the [OPTION] key from the [OPTION] key main screen, or
press [NEXT] (PF menu) until the AUX APC screen, show in fig. 15.3.1, appears.
The [NEXT] (PF menu) key toggles among the AOC parameters → AUX temperature → AUX
APC → CRG screens, in that order.
Fig. 15.3.1 AUX APC main screen