Shimadzu GC-2010 Plus - Parameter List; PF Menu

14 Diagnosis
14.4 Coolant Consumption Counter
193
GC-2010 Plus
14.4.2 Parameter list
USE COUNTER
Selection: Yes/No, Default : Yes
CONSUMPTION
Default: 0 min
The total time that the CRG is “On” is displayed.
Refer to “15.4 Setting the CRG Parameters”.
SETTING TO WARN
Range: 0−9999 min, Default : 100 min
NOTE The coolant consumption time depends on the gas cylinder volume and the temperature settings which
requier CRG. Set the warning time according to the analysis conditions. It is necessary to count the
time for the actual analysis condition once.
14.4.3 PF menu
PF menu Description
Reference
section
Reset Resets the Use counter.
――